(6-1/8) Full 6x6 Copper FLAT Fence post cap

Inside dimension: 6-1/8 inchesTo fit post: 6 inches.** Measure your posts before ordering. Not all 6x6 measure the same. **The sides are 1" long with soldered corners.Use construction adhesive to attach to your post.Over time, the copper will develop a beautiful patina...

The Metal Peddler

Arts & Craft Copper House Numbers - 4 inches

Each hand-cut copper house number 4 inches tall. Width vary (maximum is approx 4.25"). They are hand hammered & made from solid copper. The Craftsman style copper house numbers are finished with a medium dark patina to look aged. They are sealed to prevent further patination. Beautiful rosehead copper nails are included. The nails are raw solid copper.Use coupon code curbappeal for 10% discount at the shopping cart!..

The Metal Peddler

Arts & Craft Copper House Numbers - 6 inches

Each hand-cut copper house number 6 inches tall. Widths vary (maximum is approx 6.25" wide).They are hand hammered & made from solid copper. The Craftsman style copper house numbers are finished with a medium dark patina to look aged. They are sealed to prevent further patination. Beautiful rosehead copper nails are included. The nails are raw solid copper.Use coupon code curbappeal for 10% discount at the shopping cart!..

The Metal Peddler

Hanging Oval Copper Pot Rack - 28" x 12"

Beautiful hanging copper pot rack with cross braces across the center for extra kitchen storage on top and hanging space below. Our pot racks are handmade from solid copper, with copper bracing and solid copper rivets. Comes with 12 pot rack hooks: 6J & 6 S Hooks. See the SPECS tab for more info...

The Metal Peddler

Hanging Oval Copper Pot Rack - 32" x 12"

Beautiful hanging copper pot rack with cross braces across the center for extra kitchen storage on top and hanging space below. Our pot racks are handmade from solid copper, with copper bracing and solid copper rivets. Comes with 12 pot rack hooks: 6J & 6 S Hooks. See the SPECS tab for more info...

Hanging Oval Copper Pot Rack - 38" x 16"

Beautiful hanging copper pot rack with cross braces across the center for extra kitchen storage on top and hanging space below. Our pot racks are handmade from solid copper, with copper bracing and solid copper rivets. Comes with 12 pot rack hooks: 6J & 6 S Hooks. See the SPECS tab for more info...

The Metal Peddler

Stainless steel "Staff" Shaped Pot Rack ...

Each hook is approx. 4" long. The opening at the top is approx 1/4 inch, the opening at the bottom is approx 1-1/8". Designed to hang from sidebars of our pot racks. Also used as a general hanging hook around the home, office and in retail/ trade settings. Made in USA with 304 Stainless steel.Bulk discounts on our storage hooks!20 or more sets -use code hooks20 for 5% discount50 or more sets - use code hooks50 for 10% discount100 or more sets - use code hooks100 for $15% discount..

The Metal Peddler

Stainless steel J Shaped Pot Rack Hooks (set of 4)

Each pack contains 4 Stainless steel J hooks. Each J Hook is approx. 4" long. Designed to hang from sidebars of our pot racks, this hook was also featured on the cover of Martha Stewart Living Magazine, Sept 2016 for hanging off wire grids in an office. Handmade in solid Stainless steel. Bulk discounts on our storage hooks!20 or more sets -use code hooks20 for 5% discount50 or more sets - use code hooks50 for 10% discount100 or more sets - use code hooks100 for $15% discount..

The Metal Peddler

Stainless steel S Shaped Pot Rack Hooks (set of 4)

Each pack contains 4 hooks.  Each S Hook is approx. 3" long & 1-1/4" wide. Designed to hang from center braces and sidebars of our pot racks. Also used as a general hanging hook around the home, office and in retail/ trade settings. Handmade in Stainless steel 304.Bulk discounts on our storage hooks!20 or more sets -use code hooks20 for 5% discount50 or more sets - use code hooks50 for 10% discount100 or more sets - use code hooks100 for 15% discount..

The Metal Peddler

Stainless steel Utensil Pot Rack Hooks (set of 4)

Each pack contains 4 Stainless steel utensil hooks. Each Utensil Hook is approx. 3" long & 1-1/4" wide. Designed to hang from center braces and sidebars of our pot racks. Also used as a general hanging hook around the home, office and in retail/ trade settings. Handmade in solid Stainless steel.Bulk discounts on our storage hooks!20 or more sets -use code hooks20 for 5% discount50 or more sets - use code hooks50 for 10% discount100 or more sets - use code hooks100 for $15% discount..

The Metal Peddler

Stainless steel Wide S Shaped Pot Rack Hooks (set ...

Each pack contains 4 Stainless steel Wide S Hook, and each hook is approx. 4" long & 1-1/2" wide at the top, 1 inch at the bottom. Designed to hang from center braces and sidebars of our pot racks. Also used as a general hanging hook around the home, office and in retail/ trade settings. Handmade in Stainless steel.Bulk discounts on our storage hooks!20 or more sets -use code hooks20 for 5% discount50 or more sets - use code hooks50 for 10% discount100 or more sets - use code hooks100 for $15% discount..